WTD hardware and OTAP process | Telit Cinterion IoT Developer Community
July 6, 2016 - 12:55pm, 2134 views
Hi,
I have a doubt with the OTAP process and EMERG_RST pin of BGS5 module.
I have a WTD circuit connected with EMERG_RST pin of BGGS5 to restart it.
If I use (low level) the EMERG_RST pin while the module is downloading a new software using the OTAP process,Will the module restart?
Regards!
Hello,
Generally the EMERG_RST pin is for emergency only and should not be used for normal situations. The software reset should be the first method to try. But the module should restart of course regardless if it does the OTAP procedure at the moment of reset or not.
Best regards,
Bartłomiej
Hi,
As you say, we only use that pin in emergency situation, but I had to confirm the behaviour during the OTAP process.
thanks for the answer.
Regards.