Using AT COMMANDS to send SMS with the ADC Value read from the ADC port using the EHS6T LAN module | Thales IoT Developer Community
March 20, 2018 - 4:12pm, 1827 views
I´m trying to develop an AC current read value application with the EHS6T Lan module.
I´m using a arduino module that gives me a DC value 2,5 to 5 V.
I successfully read the value on the gemalto module. (0 - 1200 according to the data sheet).
I want to do some calculation on the gemalto module in order to send the AC current value using sms.
It´s possible to program the EHS6T LAN with AT COMMANDS ??
Thanks a lot!