Gemalto is now part of the Thales Group, find out more.

You are here

STD OUT change to ASC0 in EHS5 | Thales IoT Developer Community

September 19, 2015 - 9:19am, 1617 views

The default Stdout is through ASC1 in EHS5.

I changed the Stdout to ASC0 using the command.

AT^SCFG="Userware/Stdout", "ASC0","",""

The command got executed and the Stdout started in ASC0 serial interface. After which I not able to execute any AT command in either of the ports. How to recover from this condition.