[Solved] BGS2T doesn't replay my AT Commands | Telit Cinterion IoT Developer Community
June 4, 2015 - 3:37pm, 2741 views
Hi!
I have two BGS2T RS232 (terminal 3515 and 3564). I think that all turns around the configuration but I don't not how to solve it yet. I'm using HHD Software Free Device Monitoring Studio and Docklight to test both terminals and I have no problems to contact with 3515, but 35644 doesn't replay me, neither to 'AT<CR>'.
Here are both traces: 
lectura docklight 3515.txt and lectura docklight 3564.txt.
I hope you can help me.
Kind regards
Carolina
Hello,
Please check what parameters are you using for serial interface. Check the commands AT+IPR and AT+ICF in the AT commands specification. The default settings should be 115200 8N1. Maybe the other module is configured differently.
Regards,
Bartłomiej
The problem was the baudrate, I tried with all posibilities and now both works!
Hi,
Are you use the serial RS232 port to your computer with and USB-to-RS232 adaptor?
Regards
ALopez
Somewhere over the rainbow!!! Looking for the Oz Land!!!