Send AT Command "AT+CCED=0,1" to Modules EHS6 | Telit Cinterion IoT Developer Community
June 5, 2018 - 9:42am, 2585 views
Hi
I want to send AT Command "AT+CCED=0,1" to EHS6 Modules Do not EEROR .
How do I do it?
Thank You.
June 5, 2018 - 9:42am, 2585 views
Hi
I want to send AT Command "AT+CCED=0,1" to EHS6 Modules Do not EEROR .
How do I do it?
Thank You.
Hello,
This is not a standard command and EHS6 module does not have it. This may be a proprietary command form some other manufacturer. You need to search the AT commands specification for EHS6 module - maybe there is some other command that has a similar functionality.
Regards,
Bartłomiej
Hi !
The CCED command is "Cell Environment Description Indication" that is used by e.g. Multitech and Sierra Wireless.
The similar Gemalto command is AT^SMONI and AT^SMONP for neighbouring cells.
Best regards,
Antero
Antero Markkula
Communication and Mechatronics
Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi