Gemalto is now part of the Thales Group, find out more.

You are here

RS485 Connection with Module "EHS5T RS485" | Thales IoT Developer Community

September 14, 2017 - 9:23am, 1386 views

Hello,

we are trying to establish a RS485 connection using the Module "EHS5T RS485" (Pins 5 and 6 of the 12-Pin GPIO). When installing the Gemalto Software with the WTK, in the NetbeansSamples, there was a RS232Demo provided, where just the basic opening of a port and reading an InputStream is shown.

Is a similar example available for establishing a RS485-Connection and reading an InputStream?

The goal is to use the RS485 connection for a Modbus RTU communication with the EHS5T RS485 as Modbus Master.

Thank you very much in advance!

Sincerely,

Sebastian E.

PS: The image below is taken from the Document "Cinterion® Java Terminals Hardware Interface Description" with DocId "EHSxT_BGS5T_HID_v06". Is there any more Documentation available regarding the Gemalto Terminal Devices?
EHS5T RS485: GPIO connectors (8-pin and 12-pin)