Gemalto is now part of the Thales Group, find out more.

You are here

Re:class PortListener implements InPortListener | Thales IoT Developer Community

foxmain

October 30, 2014 - 3:23am, 1528 views

Hello, I have the TC65 terminal controlling two buttons through GPIO ports.One is connected into GPIO4 and the other into GPIO6 I am using the PortListener method in order to detect any change. The application is simple If the button --GPIO4-- is pushed the count with one second delay should be initiated and present the result which must be multiples of a reference value. The main problem I have is I can 't stop the process by pressing the button controlled by the port GPIO6. The hardware if working OK.The main application is controlled by a timer that stops it after 30 seconds. Any suggestion? I am using GPIO6 to stop the process without luck. Thanks in advance/ class PortListener implements InPortListener { int value=4; int cont=0; int temp; public void portValueChanged(int portValue) { while (portValue==1){ try { Thread.sleep(1000); cont++; if(cont%value==0){ valor=cont; System.out.println("Result:" + temp); } }catch(Exception e) { e.printStackTrace(); } if ((portValue==2) ||(portValue==3)) break; } } }