Problem update bgs5 by Tc65 terminal | Telit Cinterion IoT Developer Community
April 14, 2016 - 12:25pm, 2421 views
Goodmorning, i would update a software of BGS5, with message OTAP by TC65T it's possibile? When copy and paste PDU on my Hyperterminal and press ctrl-z for send message, the modem answer its ERROR. Its necessary SETTING SERVICE CENTER address what is? Includeded image OTAP SETTING
Hello,
To update the MIDlet on BGS5 module you need to send the PDU SMS for OTAP and you can send it from TC65 module also. Service center address in necessary for sending any SMS so that the module would know where to send the message - you can get this number form the mobile network operator. It is the same number that is configured by AT+CSCA command.
You have probably seen this link: https://iot-developer.thalesgroup.com/tutorial/otap-pdu-generator
Regards,
Bartłomiej
Thanks, i tried but the pdu that arrive it's format text, and i not idea of why. I setting PDU generator in this mode.
The module receive
SMS 4F54415011494D504E470A4A414455524C3A687474703A2F2F7777772
E62657461656C657474726F6E6963612E69742F6A617661746336352F4267736131363030304A617
6612E6A61640A4150504449523A613A0A4245415245523A677072730A41504E4F524E554D3A6D326
D6269732E766F6461666F6E652E69740A53544152543A494E5354414C4C0A
But not work update. Thanks
Regards
Hello,
To send the PDU message the module must be configured for PDU with AT+CMGF=0. If it's set to 1 the content will be sent as text.
If you want to use the service center address encoded in the PDU message instead of that configured in the module please uncheck the "take service ceneter address from the SIM" in the generator.
Regards,
Bartłomiej