I have seen a few words aboute the Remote SIM Access (RSA) on the PLS8 series in the AT Command Specification.
Is there any deeper information on this subject available? I would like to see an example on how to configure this.
In the AT commands specification document there should be a description of the solution. There is probably no separate document for this. But could you paste 'ATI1' reply from the module and the document version? I can't see Remote SIM Access (RSA) in PLS8 documentation. I believe this feature is only available in modules dedicated for automotive.
I found some words on in in this document: https://www.seapraha.cz/wp-content/uploads/2017/08/GSM-PLS8-T_command-set.pdf
Maybe this functionality is removed in later firmwares.
We used Siemens Cinterion AC45/AC65 modules a decade ago but later we changed to Telit that we currently use. I heard about the PLS8 and after some googling I found the document above.
Can you tell me if there is any of the of-the-shelf model of yours that supports Remote SIM?
Remote SIM Access feature can be found in the modules dedicated for automotive - for example ALS3 module which is in fact very similar to PLS8, it is the same project. As far as I know PLS8 does not support RSA - there should be a dedicated AT^SRSA command in the documentation.
To get the up-to-date information what is currently on stock I'd recommend you to contact your local Thales M2M technical sales. Please see this link: https://www.thalesgroup.com/en/markets/digital-identity-and-security/iot...