PLS8 Firmware upgrade | Telit Cinterion IoT Developer Community
November 27, 2019 - 9:56am, 1718 views
In our development board we are using two varients of PLS8(E and US)
we are trying to update/flash the firmware into PLS8(both E and US version of 4) module through host processor.
Afrer runnging AT^SFDL command it will put module into firmware download mode.
Now we need to load .USF firmware file from boards storage to module.We are not aware of the procedure to load.
Can you please explain the procesure to load/flsah firmware into module.