PLS62-W setting up GPIO5 as SYNC led | Telit Cinterion IoT Developer Community
November 13, 2018 - 2:02pm, 1396 views
hi,
the command is accepted, but checking its still "gpio" ??? on a new PLS62-W module via ASC0
Cinterion<CR><LF>
PLS62-W<CR><LF>
REVISION 02.000<CR><LF>
A-REVISION 01.000.02<CR><LF>
AT^SCFG="GPIO/mode/SYNC","std"<CR>
<CR><LF>^SCFG: "Gpio/mode/SYNC","std"<CR><LF>
<CR><LF>OK<CR><LF>
AT^SCFG?<CR>
.........
^SCFG: "Gpio/mode/SYNC","gpio"<CR><LF>
.........
best regards
Hello,
It may be because this change takes effect after restart.
Regards,
Bartłomiej