Not receving GPGGA Value | Telit Cinterion IoT Developer Community

Hey there Currently im working on EXs82 module, i was able to start the GPS but im getting  GPGGA value 0;

These are my settings:

AT^SGPSC?                                                                       
^SGPSC: "Engine","0"                                                            
^SGPSC: "Engine/Beidou","0"                                                     
^SGPSC: "Engine/Galileo","0"                                                    
^SGPSC: "Engine/StartMode","1"                                                  
^SGPSC: "Nmea/Beidou","off"                                                     
^SGPSC: "Nmea/Galileo","off"                                                    
^SGPSC: "Nmea/Glonass","off"                                                    
^SGPSC: "Nmea/GPS","on"                                                         
^SGPSC: "Nmea/Output","on"                                                      
^SGPSC: "Nmea/Urc","off"                                                        
^SGPSC: "Nmea/Version","4.10"                                                   
^SGPSC: "Power/Psm","0"  

AT^SCFG?                                                                        
^SCFG: "GPRS/AutoAttach","enabled"                                              
^SCFG: "GPRS/MTU/Mode",1                                                        
^SCFG: "GPRS/MTU/Size",1430                                                     
^SCFG: "Ident/Manufacturer","Cinterion"                                         
^SCFG: "Ident/Product","EXS82-W"                                                
^SCFG: "MEopMode/CregRoam","0"                                                  
^SCFG: "MEopMode/PowerMgmt/Suspend","0","1"                                     
^SCFG: "MEopMode/Prov/AutoSelect","on"                                          
^SCFG: "MEopMode/Prov/Cfg","fallb3gpp"                                          
^SCFG: "MEopMode/PwrSave","disabled","52","50"                                  
^SCFG: "MEopMode/RingOnData","off"                                              
^SCFG: "MEopMode/RscMgmt/Rrc","1"                                               
^SCFG: "MEShutdown/sVsup/threshold","0","0"                                     
^SCFG: "Radio/Band/2G","0000000f"                                               
^SCFG: "Radio/Band/CatM","0f0e189f","0010000200000000"                          
^SCFG: "Radio/Band/CatNB","0b0e189f","0010004200000000"                         
^SCFG: "Radio/Mtpl","0"                                                         
^SCFG: "Radio/Mtpl/2G","0"                                                      
^SCFG: "Radio/Mtpl/4G","0"                                                      
^SCFG: "Radio/OutputPowerReduction","4"                                         
^SCFG: "Radio/Suspend","1"                                                      
^SCFG: "RemoteWakeUp/Ports","current"                                           
^SCFG: "RemoteWakeUp/Ports","powerup","acm0","acm1","ecm"                       
^SCFG: "SIM/CS","0"                                                             
^SCFG: "SIM/DualMode","0"                                                       
^SCFG: "SMS/AutoAck","0"                                                        
^SCFG: "Tcp/IRT","3"                                                            
^SCFG: "Tcp/MR","10"                                                            
^SCFG: "Tcp/OT","6000"                                                          
^SCFG: "Tcp/TLS/Version","1.2","***"                                            
^SCFG: "Tcp/WithURCs","on"                                                      
^SCFG: "URC/Ringline","local"                                                   
^SCFG: "URC/Ringline/ActiveTime","2"                                            
^SCFG: "GPIO/Mode/Suspend","off"