Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

No URCs received from PLS63-W | Telit Cinterion IoT Developer Community

March 2, 2023 - 1:07pm, 209 views

Dear community,

we are integrating a PLS63-W modul into our product. Our application relies on some URCs from the phone however we do not receive any of them, except the SYSSTART.

For example we configure AT^SCKS=1 and AT^SSET=1 but we do not get URCs for these events.

We connected via ASC0. Our config is the following:

AT^SCFG?
^SCFG: "Audio/Loop","0"
^SCFG: "Call/ECC","0"
^SCFG: "Call/Speech/Codec","0"
^SCFG: "Call/VoLTE/Codec","0"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "GPRS/MTU/Mode",0
^SCFG: "GPRS/MTU/Size",1430
^SCFG: "GPRS/ApnWB","0"
^SCFG: "GPIO/Mode/ASC1","std"
^SCFG: "GPIO/Mode/DAI","std"
^SCFG: "GPIO/Mode/DCD0","std"
^SCFG: "GPIO/Mode/DSR0","std"
^SCFG: "GPIO/Mode/DTR0","std"
^SCFG: "GPIO/Mode/FNS","gpio"
^SCFG: "GPIO/Mode/FSR","std"
^SCFG: "GPIO/Mode/MCLK","off"
^SCFG: "GPIO/Mode/RING0","std"
^SCFG: "GPIO/Mode/SYNC","std"
^SCFG: "GPIO/mode/AntTun","gpio"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","PLS63-W"
^SCFG: "MEopMode/CFUN","0","1"
^SCFG: "MEopMode/CregRoam","0"
^SCFG: "MEopMode/DTM/Mode","1"
^SCFG: "MEopMode/ExpectDTR","current","acm0","acm1","acm2","acm3","asc0"
^SCFG: "MEopMode/ExpectDTR","powerup","acm0","acm1","acm2","acm3","asc0"
^SCFG: "MEopMode/IMS","1"
^SCFG: "MEopMode/Prov/AutoFallback","on"
^SCFG: "MEopMode/Prov/AutoSelect","on"
^SCFG: "MEopMode/Prov/Cfg","ROW\11Generic\113GPP*"
^SCFG: "MEopMode/RingOnData","off"
^SCFG: "MEopMode/SRPOM","0"
^SCFG: "MEShutdown/sVsup/threshold","0","0"
^SCFG: "Radio/Band/2G","0000000f"
^SCFG: "Radio/Band/3G","000400bf"
^SCFG: "Radio/Band/4G","0a0e18df","00000002000001a0"
^SCFG: "Radio/Mtpl","0"
^SCFG: "Radio/Mtpl/2G","0"
^SCFG: "Radio/Mtpl/3G","0"
^SCFG: "Radio/Mtpl/4G","0"
^SCFG: "Radio/OutputPowerReduction","8"
^SCFG: "Radio/AntTun/1","00000000","0000000000000000"
^SCFG: "RemoteWakeUp/Ports","current","acm0","acm1","acm2","acm3","rmnet"
^SCFG: "RemoteWakeUp/Ports","powerup","acm0","acm1","acm2","acm3","rmnet"
^SCFG: "SAT/AR/REFRESH","0","2002"
^SCFG: "Serial/USB/DDD","0","0","0409","1e2d","0069","Cinterion Wireless Modules","PLSx3","8780a7f6"
^SCFG: "SIM/DualMode","0"
^SCFG: "SIM/CS","SIM1"
^SCFG: "SMS/Retrm","45"
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/TLS/Version","MIN","***"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "URC/Ringline","asc0"
^SCFG: "URC/Ringline/ActiveTime","2"
^SCFG: "URC/Ringline/SelWUrc","all"

AT11
Cinterion
PLS63-W
REVISION 01.202
A-REVISION 01.000.04

 

With another modul (PLS8-e) we get these URCs.

 

Many thanks in advance,

Csaba