MIDlet HelloWorld | Telit Cinterion IoT Developer Community
June 9, 2014 - 7:48pm, 2963 views
Hi,
I installed everything as described in the documentation (and it works too). But I have one problem/question:
When performing the following:
If the ATCommand class is to be used the corresponding library must be added to the project.
Right click into the project tree and select "Build Path -> Add External Archives…". Then navigate
to the folder "Program Files\Cinterion\CMTK\EHS5\WTK\resources" and select the library
file "cwmlib_1.0.jar". If the Eclipse integration has been done by the EHS5 setup process a
classpath variable was created named "EHS5_WTK_CWMLIB" pointing to that external archive
for convenience. In that case the archive can be added by right-clicking into the project
tree and selecting "Build Path -> Configure Build Path…". In the following dialog select the
property tab "Libraries", click on the button "Add Variable…" and select the variable
"EHS5_WTK_CWMLIB" in the following window. The provided example "AtCmdDemo" uses
this class path variable.
there is no "EHS5_WTK_CWMLIB" variable? Should I add this variable manually?
Thanks.
Guy
Jun 10 2014 - 3:25pm
Hi,
you can either create the variable:
Name: EHS5_WTK_CWMLIB
Path (in my case): C:/Program Files (x86)/Cinterion/CMTK/EHS5/WTK/resources/cwmlib_1.0.jar
And then when creating project which needs cwmlib you can use Add Variable option to link the library, or you can point directly to cwmlib file using Add External JARs. Both solutions are equivalent.
Regards
Jedrzej
- Log in or register to post comments