Gemalto Cinterion EHS6T LAN | Telit Cinterion IoT Developer Community
October 10, 2017 - 3:02pm, 4406 views
I have problems with configuration and testing Gemalto Cinterion EHS6T LAN and I hope there is some one who can help me.
I have problem with configuring IP address and SIM Pin. Acording to documentation ( EHSxT_BGS5T Hardware Interface Description V08, page 86 to 91) I tried with Telnet, PuTTY and FTP.
With Telnet and PuTTY I get Permission denied
In case of FTP I dont see any file (there should be apnlist)
Also I have problem with testing this device. But this problems could be because I can't setup SIM card. Communication was tested with Docklight Scripting program.
When I send command for signal quality I don't get any answer from device.
Acording to documentation (EHS6 AT Command Set V03.001b) I should get some data
Best regards, Ales