/etc/config/network | Telit Cinterion IoT Developer Community
September 20, 2017 - 11:41am, 19874 views
Hi,
I accidentally mess up the network file and now I'm not able to connect to the ehs6t-LAN modem. Is there a factory reset (will the factory reset back the network file)?
Or I able to connect via serial port through PC and using the some command to setup the network or reset via AT command can solve this?
Cheers
Hi Bartłomiej,
I have the same problem with my ELS61T-E2 LAN-LTE .
Which is the procedure for recovering the original firmware? Is it possible only via Serial Port? I'm no more able to contact the device using telnet/ssh or ftp
Getting the firmware and procedure would be appreciated also for me, thank.
Hello,
I will send it to you. Please let me know the version of OpenWrt. It can be 15.05 or 18.06.1. You can also check it by verifying the label on the carton of your terminal. If on the label there is password (PW) it means that you have newer version.
Best regards,
Adam
Hello ,
I suppose that OpneWrt is the firmware for the device (sorry I'm 'novice' on the argumet embedded devices) In the label attatched to the carton, except for the usual information MAC, QRCode k4, etc, it seems no password is present.
Thanks in advance.
Hello,
please check your email.
BTW you can also check version of OpenWrt in webinterface.
Best regards.
Adam