EHS6T LAN | Telit Cinterion IoT Developer Community
August 18, 2016 - 4:00pm, 9573 views
Hello,
As I understand the EHS6T LAN is unavailible at the moment however it is important for me to know now if the module can act as a client on a network. We are going to be using an external router and will not be using the 3G in the module. I understand the module has a full TCP/IP stack but we want to be absolutely sure that we can set the module with a static IP and it will be able to reach the internet via our external router (gateway).
Thanks for the help.
Hello,
Bartłomiej, thanks for you answer. It takes time to physically access the modem, RS232 testing will be done in a few days. It is clear that SSH works fine. The LAN connection to the modem is configured in the OpenWRT console. The web interface works correctly. Problems only with the execution of AT commands on port 1234.
Denis Makhonkov
Hello,
If SSH is working some investigation could be done over SSH. The module is connected to OpenWrt over USB. There is more than one virtual interface available in the system. One is used for Telnet and one for Internet connection. It could be checked if it is possible to connect to another interface and send commands (not all interfaces serve AT commands interpreters but at least one should do) or if it is possible to send commands over the one used for Telnet. Maybe that would give us an information in which component the problem is.
BR,
Bartłomiej