EHS6 Java application for KNX RF through ASC0/1 | Telit Cinterion IoT Developer Community
November 16, 2016 - 9:42am, 1798 views
Hi,
Has anybody seen or made a Java based application to connect the EHS6 module to KNX RF through ASC0/1?We have a requirement for such type of software in an building automation project.
I am looking for a simple command and gateqay example.
The KNX RF module connected is the Radiocrafts RC1180-KNX2 with UART interface (optional CTS/RTS).
Best Regards,Antero
Antero Markkula
Communication and Mechatronics
Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi
Hello,
we had connected BGS5T with Carrier climate which uses KNX for communication. First we used IntesisBox (I think that this device https://www.intesisbox.com/en/ref-knx-ascii-server-ibox-ascii-knx/) and latter we managed to communicate trough KNX without Intesisbox and we used just RS232 to RS485 converter.
Regards,
Jure
Hello,
We don't have any example for KNX. The most popular or only Java library that I can find is Calimero, but it would need adaptation to work on the module. Has anybody tried?
BR,
Bartłomiej