EHS5-E HW module integration with MCU refrence designe or schematic | Telit Cinterion IoT Developer Community
November 30, 2017 - 1:36pm, 1984 views
Hello everyone,
can any one help me to draw schematic of ehs5-e module with nxp 32 bit mcu integration. how i connect communication module pad to mcu pad, for data transfer
Hi,
Please see the reference design here:
https://iot-developer.thalesgroup.com/documentation/example-schematic-eh...
I hope it will be helpful.
Additionally you can find the Hardware Interface Description document here:
https://iot-developer.thalesgroup.com/documentation/download-documentati...
Regards,
Bartłomie
Thanks for helping.
can you please describe me how i connect EHS5-E module with my MCU schematic
Hello,
If you ask about connecting the serial interface to an MCU, you cannot connect it directly because there are different voltage levels - the module is 1.8V domain and MCU probably 3.3V. You need level shifters. This is covered by the reference design document.
Regards,
Bartłomiej