CSD not working on ELS61-E | Telit Cinterion IoT Developer Community
April 29, 2021 - 10:35am, 1775 views
Hi,
I'm trying to manage CSD calls from a java application in the ELS61-E module.
The module seems not to manage CSD though as when I issue the command:
ATCommand m_atc = = new ATCommand(true);
I get the following exception:
class java.lang.IllegalStateException - openATCommand: CSD is not supported on this product.
How can I solve this problem ?
Here it is the answer to the ATI1 command:
Cinterion
ELS61-E R2
REVISION 02.000
A-REVISION 01.000.02
And AT^SCFG? answer:
^SCFG: "Audio/Loop","0"
^SCFG: "Call/ECC","0"
^SCFG: "Call/Speech/Codec","0"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Gpio/mode/ASC1","std"
^SCFG: "Gpio/mode/DAI","gpio"
^SCFG: "Gpio/mode/DCD0","gpio"
^SCFG: "Gpio/mode/DSR0","gpio"
^SCFG: "Gpio/mode/DTR0","gpio"
^SCFG: "Gpio/mode/FSR","gpio"
^SCFG: "Gpio/mode/MCLK","gpio"
^SCFG: "Gpio/mode/PULSE","gpio"
^SCFG: "Gpio/mode/PWM","gpio"
^SCFG: "Gpio/mode/RING0","gpio"
^SCFG: "Gpio/mode/SPI","rsv"
^SCFG: "Gpio/mode/SYNC","std"
^SCFG: "Gpio/port/MCLK","GPIO4"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","ELS61-E R2"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "MEShutdown/sVsup/threshold","0","0"
^SCFG: "MEopMode/CFUN","0","1"
^SCFG: "MEopMode/Comp1",""
^SCFG: "MEopMode/CregRoam","0"
^SCFG: "MEopMode/ExpectDTR","current"
^SCFG: "MEopMode/ExpectDTR","powerup"
^SCFG: "MEopMode/SoR","off"
^SCFG: "MeOpMode/SRPOM","0"
^SCFG: "Radio/Band/2G","0x00000014"
^SCFG: "Radio/Band/3G","0x00000081"
^SCFG: "Radio/Band/4G","0x08080085"
^SCFG: "Radio/Mtpl/2G","0"
^SCFG: "Radio/Mtpl/3G","0"
^SCFG: "Radio/Mtpl/4G","0"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "RemoteWakeUp/Event/USB","none"
^SCFG: "RemoteWakeUp/Ports","current"
^SCFG: "RemoteWakeUp/Ports","powerup"
^SCFG: "Serial/Ifc","0"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","005B","Cinterion Wireless Modules","ELSx",""
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/TLS/Version","MIN","***"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/OTAP","0"
^SCFG: "Urc/Ringline","local"
^SCFG: "Urc/Ringline/ActiveTime","2"
^SCFG: "Userware/Autostart","1"
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"
^SCFG: "Userware/DebugMode","off"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","usb1",,,,"off"
^SCFG: "Userware/Watchdog","1"
Best regards
Marco
Hello,
I've checked that although this module supports CSD in general it does not support it via Java MIDlets. The workaround to avoid this error is to use ATCommand(false). So your problem can't be solved unfortunately.
If you have to manage CSD calls in Java you need different module with Java and CSD.
Best regards,
Bartłomiej
Hello Bartlomiej,
thank you for your answer.
Could you tell which modules (possibly 4G modules) do have Java and CSD capabilities?
Best regards,
Marco
Hello,
That would be EHS5/6 modules which are 3G unfortunately.
Regards,
Bartłomiej
Hello,
any chanche it will be fixed in the future for the ELS61-E ?
Best regards
Marco
Hello,
I don't have such information.
Please report this to our support directly via SalesForce or contact your local technical sales person or distributor.
Best regards,
Bartłomiej