Can't set watchodg on BGS5T | Telit Cinterion IoT Developer Community

Hello,

last week we got shipment of around 200 BGS5T modules. We could configure most of them but with  4 of them we got a problem. We were able to install our MIDlet but we aren't able to do SSPI settings and Watchdog settings.

We have our own configurator to install MIDlets and to make settings through AT commands, so we had same steps for all modules. I also tried to configure watchdog trough RS232 terminal but green light won't blink.

EDIT: Neverimind we had wrong port settings, so problem is solved.

Regards,

Jure