Can't set certificate verification to default: ^SJMSEC: 1,0,1,0 | Telit Cinterion IoT Developer Community
November 21, 2017 - 5:17pm, 1446 views
Hello,
I am trying to put certificate verification to default, but without luck. The default should be: ^SJMSEC: 1,0,1,0
I have change it in the first place by typing AT commad:
AT^SJMSEC=cmd,0B00310001000500020001restarted the board and since that I can not turn it back to the default.
Now, when I type: AT^SJMSEC?
there is a message: ^SJMSEC: 1,1,1,0
I did tried deleting the certificates using the: AT^SJMSEC=cmd,060091000000, the response I get is OK. But after the reboot, nothing is changed.
Also, I have tried the things from this thread: https://iot-developer.thalesgroup.com/threads/restore-default-sjmsec-101...
On my Windows mashine I had to run the CMD as a administrator, go the ..../Cinterion/CMTK/WTK/bin and run the lines suggested in the thread. But, still, I couldn't restore SJMSEC to default values.
ATI1 gives me:
Cinterion
ELS61-E
REVISION 01.000
A-REVISION 00.022.00
We also have some board with other FW and it is the same:
ATI1
Cinterion
ELS61-E
REVISION 01.000
A-REVISION 00.014.00
Can you help me to restore the default on the SJMSEC?
Best regards,
Toma
Hello,
If you have activated https certificate verification it is not enough to remove all certificates that you have uploaded but you need to deactivate the https certificate verification with a proper command.
Please try this:
AT^SJMSEC=cmd,0B00310001000500020000
and then reboot the module.
Regards,
Bartłomiej
Thank you, that helped.
Best regards,
Toma