Cant connect to Telstra network | Telit Cinterion IoT Developer Community
January 4, 2019 - 11:02pm, 2165 views
Hi
I cannot connect to the telstra network.
responses are:
at+cops=?
+COPS: (1,"Telstra Mobile","Telstra","50501",7),(3,"Optus AU","Optus","50502",7)
at+cops=0
ERROR
All other commands report as expected. I have confirmed that the SIM in use is working by putting it into a different device.
Are there any specific commands that need to be executed before connecting to Telstra ?
ATI reports
ati
Cinterion
ELS61-E
REVISION 01.000
My sequences are:
ATE1
AT\Q2
AT+CPIN?
AT+COPS=0
AT+CREG?
at^sics=1,"conType","GPRS0"
at^sics=1,"apn","telstra.m2m"
at^siss=1,"srvType","Socket"
at^siss=1,"conid","1"
at^siss=1,"address","socktcp://test.mosquitto.org:1883;etx"
Hello,
I can see that you are not using the Australian variant of the module but as it 'sees' some 4G networks it should probably be able to register.
Does it never register? Please check AT^SCFG? and ATI1 output. Please try to send at+cops=0 more ***** if it returns ERROR or deregister from the network and then try to register. Normally it should be able to register automatically after booting. If the module does not register automatically please also try the manual network selection with AT+COPS command. Please check AT+CEER output if the registration fails. Please paste the log with commands outputs.
Best regards,
Bartłomiej