Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

Community > Forum > Cellular Hardware > BGS5 Sending email

BGS5 Sending email | Telit Cinterion IoT Developer Community

Like
0
13
Jure's picture
Jure

September 29, 2014 - 4:51pm, 8306 views

I am trying to send txt file over email but I am getting : CME ERROR: operation temporary not allowed. In documentation it says that this is caused if AT^SICI is used simultaneously on different instances. But I didn’t start any other connection, tried on moduls fresh restart. Here is the log of my AT commands: at at OK at^sici? at^sici? OK at^siso? at^siso? ^SISO: 0,"" ^SISO: 1,"" ^SISO: 2,"" ^SISO: 3,"" ^SISO: 4,"" ^SISO: 5,"" ^SISO: 6,"" ^SISO: 7,"" ^SISO: 8,"" ^SISO: 9,"" OK AT+CREG? AT+CREG? +CREG: 0,1 OK AT^sics=0,conType,"GPRS0" AT^sics=0,conType,"GPRS0" OK AT^SICS=0,inactTO,"20" AT^SICS=0,inactTO,"20" OK AT^SICS=0,user,"simobil" AT^SICS=0,user,"simobil" OK AT^SICS=0,passwd,"internet" AT^SICS=0,passwd,"internet" OK AT^SICS=0,apn,"m2m.027.simobil.si" AT^SICS=0,apn,"m2m.027.simobil.si" OK AT^SICS=0,dns1,"8.8.8.8" AT^SICS=0,dns1,"8.8.8.8" OK AT^SISS=9,srvType,"Smtp" AT^SISS=9,srvType,"Smtp" OK AT^SISS=9,conId,"1" AT^SISS=9,conId,"1" OK AT^SISS=9,address,"smtps://user.name \00gmail.com:mypassword \00smtp.gmail.com" AT^SISS=9,address,"smtps://user.name\00gmail.com:mypassword\00smtp.gmail.com" OK AT^SISS=9,smSubj,"My Test Mail" AT^SISS=9,smSubj,"My Test Mail" OK AT^SISS=9,smFrom," user.name \00gmail.com" AT^SISS=9,smFrom," user.name \00gmail.com" OK AT^SISS=9,smRcpt," user.name \00gmail.com" AT^SISS=9,smRcpt," user.name \00gmail.com" OK AT^SISS=9,smAuth,"login" AT^SISS=9,smAuth,"login" OK AT^SISS=9,smMsg,"This is the message for testing mail." AT^SISS=9,smMsg,"This is the message for testing mail." OK AT^SISS=9,path,"file:///a:/data/" AT^SISS=9,path,"file:///a:/data/" OK AT^SISS=9,cmd,"files" AT^SISS=9,cmd,"files" OK AT^SISS=9,files,"test.txt" AT^SISS=9,files,"test.txt" OK AT^SISO=9 AT^SISO=9 ERROR AT+CMEE=2 AT+CMEE=2 OK AT^SISO=9 AT^SISO=9 +CME ERROR: operation temporary not allowed at^siso? at^siso? ^SISO: 0,"" ^SISO: 1,"" ^SISO: 2,"" ^SISO: 3,"" ^SISO: 4,"" ^SISO: 5,"" ^SISO: 6,"" ^SISO: 7,"" ^SISO: 8,"" ^SISO: 9,"Smtp",6,1,0,0,"0.0.0.0:0","0.0.0.0:0" OK at^sisc=9 at^sisc=9 OK at^siso=9 at^siso=9 +CME ERROR: operation not allowed at^siso? at^siso? ^SISO: 0,"" ^SISO: 1,"" ^SISO: 2,"" ^SISO: 3,"" ^SISO: 4,"" ^SISO: 5,"" ^SISO: 6,"" ^SISO: 7,"" ^SISO: 8,"" ^SISO: 9,"Smtp",6,1,0,0,"0.0.0.0:0","0.0.0.0:0" OK at^siso=9 at^siso=9 +CME ERROR: operation temporary not allowed Here is my scfg: at^scfg? at^scfg? ^SCFG: "Call/ECC","0" ^SCFG: "GPRS/AutoAttach","enabled" ^SCFG: "Gpio/mode/ASC1","std" ^SCFG: "Gpio/mode/DAI","gpio" ^SCFG: "Gpio/mode/DCD0","std" ^SCFG: "Gpio/mode/DSR0","std" ^SCFG: "Gpio/mode/DTR0","std" ^SCFG: "Gpio/mode/FSR","gpio" ^SCFG: "Gpio/mode/PULSE","gpio" ^SCFG: "Gpio/mode/PWM","gpio" ^SCFG: "Gpio/mode/RING0","std" ^SCFG: "Gpio/mode/SPI","rsv" ^SCFG: "Gpio/mode/SYNC","std" ^SCFG: "Ident/Manufacturer","Cinterion" ^SCFG: "Ident/Product","BGS5" ^SCFG: "MEShutdown/Fso","0" ^SCFG: "MEopMode/SoR","on" ^SCFG: "Radio/Band","15" ^SCFG: "Radio/OutputPowerReduction","4" ^SCFG: "Serial/Interface/Allocation","1","1" ^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port","" ^SCFG: "Tcp/IRT","3" ^SCFG: "Tcp/MR","10" ^SCFG: "Tcp/OT","6000" ^SCFG: "Tcp/WithURCs","on" ^SCFG: "Trace/Syslog/Otap","0" ^SCFG: "URC/Ringline","local" ^SCFG: "URC/Ringline/ActiveTime","2" ^SCFG: "Userware/Autostart","1" ^SCFG: "Userware/Autostart/Delay","0" ^SCFG: "Userware/Passwd", ^SCFG: "Userware/Stdout","null",,,,"off" ^SCFG: "Userware/Watchdog","0" OK Sorry for such a long post. I searched the forums for similar problems but couldn’t find anything. Thank you for your help. Jure
13
Comment
Log in or register to post comments
1 - 10 of 13 Comments

Pages

Jędrzej Gemalto Moderator's picture
Jędrzej Gemalto...
Sep 29 2014 - 6:13pm
Hi, I've checked your log. It looks like you're using setting up internet connection 0 with AT^SICS=0,... and then attaching internet service to internet connection 1. Change AT^SISS=9,conId,"1" to AT^SISS=9,conId,"0". Regards Jedrzej
Jure's picture
Jure
Sep 29 2014 - 7:13pm
Thank you. Now I get to this point. at^siso=9 at^siso=9 OK ^SIS: 9,0,4400,"Smtp open(smtp.gmail.com:465)" ^SIS: 9,0,14,"An established connection was aborted, possibly due to a data transmission" Reagrds Jure
Jędrzej Gemalto Moderator's picture
Jędrzej Gemalto...
Sep 30 2014 - 2:50pm
Hello, if you didn't install root certificates, you need to do it. Please refer to AT^SJMSEC command description and Java User Guide for tips how to install them. Regards Jedrzej
Jure's picture
Jure
Sep 30 2014 - 6:38pm
In documentation there are instructions to use jseccmd.jar from wtk/bin, but I don't have such jar file in the folder. Can i get it somwhere else? Regards Jure EDIT: Found it in other directory.
Jure's picture
Jure
Oct 1 2014 - 7:10pm
Is there any other way to remove Customer ME key store then java -jar jseccmd.jar -cmd DelCustomerKeystore? Because now I can't run jave midlets, it says: The signature of the content provider certificate is invalid. And when I try to remove in the way described before, I get: invalid signature error
Jędrzej Gemalto Moderator's picture
Jędrzej Gemalto...
Oct 2 2014 - 2:24pm
Hello, are you entering all the needed parameters? IMEI, alias, keypass, storepass and keystore? It is all necessary to disable keystore. Regards Jedrzej
Jure's picture
Jure
Oct 2 2014 - 2:46pm
Hello, yes it builds up the data needed for the at^sjmsec command. But this command allways returns ^SJMSEC: 7,"keystore error (9: invalide signature). Example: java -jar jseccmd.jar -cmd DelCustomerKeystore -imei 358741050100988 -alias operator -keypass gem altoiku -storepass gemaltoiku -keystore ./se_customer.ks > DelCustomerKeystore.txt It would be enough if I can just somehow disable setting that only signed midlets can be installed, because I can't run java midlets now. Even when I import my key in Netbeans. I tryed AT&F to reset the settings but it looks that it can't be reset. Now it's just like that my module is only locked to AT commands and I can't do any work. So is there any way around or is this only way? Could I try to add another keystore which would maybe work then also in netbeans or do I have to get key and certificate that will be signed by CA? Reagrdas Jure
Jędrzej Gemalto Moderator's picture
Jędrzej Gemalto...
Oct 2 2014 - 7:33pm
Hi, you have to delete the keystore or install signed MIDlets. Using AT^SJMSEC is the only way. Please make sure you're entering the same passwords as when you've been creating the keystore. You also have to use exactly the same keystore file. Command signature is transmitted at the end of the command. As generated command is quite long some terminals may cut it. Please check if you're able to delete keystore using other terminal programs. Regards Jedrzej
Jure's picture
Jure
Oct 2 2014 - 8:06pm
Hello, I am afraid that original keystore file got overwriten when I was trying to install HTTPS certificat. I still know all the data that I entered, but this probably won't help if I need original? I only have original .bin file with which I set up the keystore. So now there is no other way then to sign my midlets? What happens if I add another keystore with same name and then try to remove it? Thank you for you help. Regards Jure
Jure's picture
Jure
Oct 3 2014 - 2:48pm
Hello. I tried creating new keystore file and add it to the module, but it says that keystore already exists. So since I don't have original keystore file, only .bin file there is no way for me to install any middlet? I checked how security commands are built and I found out that Set Manufacturer Keystore command is built like this: Total len 0x0001 0x0003 Param unit IMEI Param unit keystore Param unit signature And for Del Manufacturer Keystore: Total len 0x0002 0x0002 Param unit IMEI Param unit signature Is it possible that I retrieve Param unit signature from .bin file and insert it somehow in Del Manafacturer Keystore command and delete keystore like this. I open the .bin file and found IMEI and Param unit keystore, but I don't know how the rest of the file is built. If I send you the .bin file would anyone in Gemalto be able to build me Del Manafacturer Keystore command so that I can use my module again? I would be most thankful. EDIT: I decoded part of the file, but I would need your help, do you have Skype or similar communication program? Regards Jure
1 - 10 of 13 Comments

Pages