Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

Community > Forum > Cellular Hardware > BGS2-W Not re-registering to mobile network (Not data network)

BGS2-W Not re-registering to mobile network (Not data network) | Telit Cinterion IoT Developer Community

Like
0
1
Dave Lee's picture
Dave Lee

July 31, 2019 - 12:43pm, 1215 views

Running a BGS2_W with 04.030a firmware. If the signal is lost during a voice call (aerial disconnected), and then reconnected after, the BGS2_W is not re-registering (status LED not indicating so, AT+CIND? indicating service=0, for atleast 15 mins).

Is this solved in 04.030b? or am I missing something?

Can I force registration without resetting the BGS2-W?

The BGS2-W re-registers ok when the same happens in idle.

Thanks

Dave

1
Comment
Log in or register to post comments
Bartłomiej Gemalto Moderator's picture
Bartłomiej Gema...
Aug 1 2019 - 10:48am

Hello,

Please check ATI1 reply for a detailed firmware version. You can force registration with AT+COPS=0 command. Please send AT+CEER=0 and then check AT+CEER reply after this problem happens to see if there is any error report.

Regards,

Bartłomiej