Gemalto is now part of the Thales Group, find out more.

You are here

AT&T Sim card cannot read by PLS8 | Thales IoT Developer Community

May 18, 2017 - 4:42am, 2566 views

I have one AT&T Sim card which cannot be read by PLS8 (other AT&T sim can be read), even the CCID. I have tested it in Moto G4 mobile and it can be read but the sim seems not work with every mobile. Anyone meet this problem? Please advise. Thanks.

Below is the AT command I used:

AT+CPIN?

+CME ERROR: SIM wrong

AT^SATR="RestartSim"

+CME ERROR: SIM failure

at^scks?

^SCKS: 0,3

OK

AT^SSET?

^SSET: 0

OK

AT^SCID

+CME ERROR: SIM failure

AT^SIND?

^SIND: signal,0,99

^SIND: service,0,0

^SIND: sounder,0,0

^SIND: message,0,0

^SIND: call,0,0

^SIND: roam,0,0

^SIND: smsfull,0,0

^SIND: audio,0,0

^SIND: simstatus,0,1

^SIND: simdata,0

^SIND: eons,0,0,"","",0

^SIND: nitz,0,"",+00

^SIND: sendsms,0,0,0

^SIND: psinfo,0,0

^SIND: simlocal,0,1,0

^SIND: lsta,0,0

^SIND: pacsp,0,99

^SIND: steerroam,0

^SIND: pagingcoor,0,0

^SIND: ceer,0,0

^SIND: iccid,0,""

^SIND: euiccid,0,""

^SIND: imsi,0,""

^SIND: is_cert,0,0,"","","","","",""

^SIND: newsms,0

^SIND: voiceprompt,0,0

^SIND: ltebot,0,0,0,""

^SIND: simread,0,0

OK

AT^SCFG?

^SCFG: "Audio/Loop","0"

^SCFG: "Audio/SvTone","0"

^SCFG: "Call/ECC","0"

^SCFG: "Call/Speech/Codec","0"

^SCFG: "GPRS/Auth","2"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "MEop****/CFUN","1","1"

^SCFG: "MEop****/DTM/****","1"

^SCFG: "MEop****/ExpectDTR","current","acm1","acm2","acm3","acm4","rmnet0","rmnet1","asc0"

^SCFG: "MEop****/ExpectDTR","powerup","acm1","acm2","acm3","acm4","rmnet0","rmnet1","asc0"

^SCFG: "MEop****/NonBlock/Cops","0"

^SCFG: "MEop****/PingRsp","1"

^SCFG: "MEop****/PowerMgmt/LCI","disabled"

^SCFG: "MEop****/PwrSave","enabled","52","50"

^SCFG: "MEop****/PwrSave/Delay/USB","10"

^SCFG: "MEShutdown/OnIgnition","off"

^SCFG: "MEShutdown/Timer","off"

^SCFG: "Misc/CId",""

^SCFG: "Radio/Band","2928787"

^SCFG: "Radio/CNS","0"

^SCFG: "Radio/Mtpl","0"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "RemoteWakeUp/Event/ASC","none"

^SCFG: "RemoteWakeUp/Event/URC","none"

^SCFG: "RemoteWakeUp/Event/USB","none"

^SCFG: "RemoteWakeUp/Ports","current","acm1","acm2","acm3","acm4","rmnet0","rmnet1","asc0"

^SCFG: "RemoteWakeUp/Ports","powerup","acm1","acm2","acm3","acm4","rmnet0","rmnet1","asc0"

^SCFG: "RemoteWakeUp/Pulse","10"

^SCFG: "SIM/CS","SIM_1"

^SCFG: "SIM/Retry","on"

^SCFG: "SMS/AutoAck","0"

^SCFG: "Tcp/IPv6Priv","1"

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/Loop","disabled"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/TLS/Version","MIN","***"

^SCFG: "Tcp/UnreachRsp","1"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "URC/DstIfc","app"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

OK

Alice