Gemalto is now part of the Thales Group, find out more.

You are here

AT^SFSA and AT^SJDL commands hangs after CONNECT | Thales IoT Developer Community

March 10, 2017 - 12:50pm, 1771 views

Hello!

I've tried to push (download) some files to device. I used AT commands to do it since I'm a OSX user . Unfortunately without any success. One I ran AT^SFSA=write,0,10  and get CONNECT back device kinda hangs. It doesn't react to aby number of bytes, then after some time it responds with ERROR . Documentation says that it should timeout after 30 secods after last send byte. Nothing like that happens. Only feasible solution at this point seems to be restarting device. Same goes with AT^SJDL.

I tried with serial terminal and python script that uses pySerial. Also tried with script from: https://iot-developer.thalesgroup.com/tutorial/python-script-load-files-modules-ffs-over-command-interface No go.

Is there something obvious I'm missing?

My ATI1 command output:

Cinterion

EHS5-E

REVISION 03.001

A-REVISION 00.000.42