AT^BAND_PREF returns ERROR on MV31-W modem | Thales IoT Developer Community
September 3, 2021 - 2:56pm, 1014 views
I have been trying out sending AT commands to MV31-W modem. Most commands are working, however I am unable to enable/disable bands using AT^BAND_PREF.
Here are some of my outputs :
at OK at+cpin? +CPIN: SIM PIN OK at+cpin=**** OK at+cfun? +CFUN: 1 OK at^slmode? ^SLMODE:1,4 OK at+cgdcont? +CGDCONT: 1,"IPV4V6","internet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 OK at^band_pref? ERROR at^band_pref=nr5g,2,71 ERROR at+cops? +COPS: 0 OK at+cops=1,2,"20815" OK +cops: 1,2,"20815",2 OK
I was wondering if the version we are using might have to be updated...
Here is the version of our MV31-W module :
at+skuid HW Revision : V065 SW Revision : T99W175.F0.0.0.3.4.GC.003 OK
Thank you in advance for your answer,
A Random Intern