Telit Cinterion IoT Developer Community
MV31: Driver SW on Microsoft Windows® 10 /11
Showcase, December 4, 2021 - 6:07pm, 3000 views
MV31 is MS WHQL certified
The MBIM interface of MV31 is as default built-in on Windows ® 10 /11, so that the Mobile Broadband interface is at a plug & play.
MBIM interface is recommended for MV31 with its 5G high speed data. Cellular data connection via MBIM is automatically managed by Windows ® 10 /11 (see: Network & Internet ->Cellular -> Operator Setting )
Additionally available interfaces on MV31: Modem interface, NMEA port, DIAG port. The corresponding driver SW installation goes with a driver SW package, as one-step via an install command script
AT commands can also be sent over MBIM interface (see: AT-over-MBIM tool)
see screenshots attached.
Refer to MS DOCs: Network Driver Design Guide
Microsoft MB 5G Operations Overview
1) "MBIM Ex 2.0 – 5G NSA support“: https://docs.microsoft.com/en-us/windows-hardware/drivers/network/mbimex...
2) "MBIM Ex 3.0 – 5G SA Phase 1 support“: https://docs.microsoft.com/en-us/windows-hardware/drivers/network/mbimex...