Telit Cinterion IoT Developer Community
AT Demo - parsing AT Commands over the air
Showcase, April 27, 2018 - 7:06pm, 7160 views
AT Demo - parsing AT Commands via Serial ASC0, SMS and MQTT
Concept board demonstration for events
AT Command parsing via SMS and MQTT
AT Command parsing via emulated ASC0
Detailed incoming call notification out to ASC0 and MQTT
"GPS" (on EHS8 only) and Cell ID "LOC" based location via SMS and MQTT
Module status via SMS and MQTT
Concept Board Button-A sends readings, locations and module status to all subcribers.
A "+++" style break added to allow return to normal ASC0 AT Command interpreter.
Download File 2020_06_26_AT_Demo.pdf
(pdf | 895.93 KB)
Download File dist.zip
(zip | 305.18 KB)
Download File src.zip
(zip | 8.41 KB)
Download File 2020_09_10_resources.zip
(zip | 293.71 KB)
Download File 2020_09_10_resources.zip
(zip | 293.71 KB)
Author
Hi Simon,
Again a brilliant demo. I tested that with a EHS6T LAN terminal with success.
The stdio can be seen in the OpenWRT side as /dev(ttyACM3.
Best Regards, Antero
Antero Markkula
Communication and Mechatronics
Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi
Hi MULLENGERS,
I'm trying to compile the sources that are available in this topic, but from what I've found there are missing other classes(sources). For example: GpioHandler, AtcHandler, ASC0Handler, ... etc.
The dist package files work, but I'd like to do other tests.
I'm using the Eclipse IDE.
Best Regards