Does PLS-8 support Win 10 SAC 20H2? | Telit Cinterion IoT Developer Community
March 2, 2021 - 11:33am, 4436 views
I have a tablet with PLS-8 module and it works with Win 10 SAC 1809 and older version. But recently when we upgrade to Win 10 SAC 1909 or 20H2, both of them are fail to connect to internet. The tray icon stays gray and the telecom shows "turned off". Is there anyway to solve the problem if I want to use the latest Win 10 SAC version?
Photo link as below.
file:///C:/Users/WIN10/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg
Hello,
I recently advised to set AT^SSRVSET="actSrvSet",4 to enable MBIM if you have release 4 module. After setting this and rebooting the module the new device type should be recognized by Windows and therefore new driver installed - 'Generic Mobile Broadband Adapter' (by Microsoft). According to your recent screen you didn't do that (at least did not reboot the module after the configuration change). Please try.
Regards,
Bartłomiej
Hi
We follow your steps and reboot the moduel as below photo.
https://ppt.cc/fJVUMx
Module FW as below photo and the icon still fail.
https://ppt.cc/fCtVgx
Please check and let me know if you have any advise...
Hello,
I was checking with my module and after switching to "actSrvSet",4 Windows shows 'Generic Mobile Broadband Adapter' (as I have written before) and not Gemalto M2M MB Wireless Ethernet Adapter as in your case. Pleas try to uninstall this driver (remove it from PC if necessary) and let the Windows install the standard Microsoft driver ('Generic Mobile Broadband Adapter'). Please then check if it helped.
Regards,
Bartłomiej