ALS3-E and ALS3-US documentation and Firmware | Telit Cinterion IoT Developer Community
February 15, 2020 - 11:31am, 3584 views
Hello,
Where I can get ALS3-E and ALS3-US M2M modules documentation for pin-out and Firmware update, upload and download procedures and etc.?
Are those modules have different hardware or firmware controls which bands are used?
There are not much details in datasheet:
https://www.gemalto.com/brochures-site/download-site/Documents/M2M_ALS3_datasheet.pdf
Hello,
Generally you can find documents for many modules here: https://iot-developer.thalesgroup.com/documentation/download-documentati...
But as I see ALS3 is missing - I can send you some documents.
And you can ask your local Gemalto sales also.
Best regards,
Bartłomiej
Hello,
I'm looking for the ALS3 documentation too, could please help me ?
BR
daniele
Hello,
Could you send me ATI1 reply so that I could find the proper version?
Thanks,
Bartłomiej
Unfortunately I've not direct access to the modem's serial command, because it is managed by ofono.
Anyway, on ofono log I read:
App> AT+CGMR\r
App< \r\nREVISION 03.011\r\n\r\nOK\r\n
App> AT+CGMM\r
App< \r\nALS3-E\r\n\r\nOK\r\n
App> AT+CGMI\r
App< \r\nCinterion\r\n\r\nOK\r\n
The "A-REVISION" field is missing, but I hope this information can help you.
Thank you in advance
Hello,
I've sent you an email.
BR,
Bartłomiej
Thank you very much !
Hello,
I am not sure if this thread is still active, but I am also in need of the ALS3 specific documents.
Hello,
Could you provide 'ATI1' command output?
Thanks,
Bartomiej
I believe I have the same version as Daniele Ferro did