Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

ELS61: ASC1/COM1 not available | Telit Cinterion IoT Developer Community

December 14, 2020 - 5:57pm, 1041 views

I have the same problem as the following thread:

https://iot-developer.thalesgroup.com/threads/els61-com1asc1-not-accessible

But my configuration seems ok and the problem is still present. The ASC1/COM1 port is not listed in java (only COM0,USB0, USB1, USB2 are shown). Here it is the output of commands:

AT^SPOW?:

^SPOW: 1,0,0

AT^SCFG?:

^SCFG: "MEopMode/Comp1",""

^SCFG: "Gpio/port/MCLK","GPIO4"

^SCFG: "Serial/Ifc","0"

^SCFG: "RemoteWakeUp/Event/USB","none"

^SCFG: "RemoteWakeUp/Ports","current"

^SCFG: "RemoteWakeUp/Ports","powerup"

^SCFG: "Audio/Loop","0"

^SCFG: "Call/ECC","0"

^SCFG: "Call/Speech/Codec","0"

^SCFG: "Gpio/mode/ASC1","std"

^SCFG: "Gpio/mode/DAI","gpio"

^SCFG: "Gpio/mode/DCD0","gpio"

^SCFG: "Gpio/mode/DSR0","gpio"

^SCFG: "Gpio/mode/DTR0","gpio"

^SCFG: "Gpio/mode/FSR","gpio"

^SCFG: "Gpio/mode/PULSE","gpio"

^SCFG: "Gpio/mode/PWM","gpio"

^SCFG: "Gpio/mode/RING0","gpio"

^SCFG: "Gpio/mode/SPI","rsv"

^SCFG: "Gpio/mode/SYNC","gpio"

^SCFG: "Gpio/mode/MCLK","gpio"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","ELS61-E R2"

^SCFG: "MEopMode/SoR","off"

^SCFG: "MEopMode/CregRoam","0"

^SCFG: "MeOpMode/SRPOM","0"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEShutdown/sVsup/threshold","0","0"

^SCFG: "Radio/Band/2G","0x00000014"

^SCFG: "Radio/Band/3G","0x00000081"

^SCFG: "Radio/Band/4G","0x08080085"

^SCFG: "Radio/Mtpl/2G","0"

^SCFG: "Radio/Mtpl/3G","0"

^SCFG: "Radio/Mtpl/4G","0"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","0","0"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","005B","Cinterion Wireless Modules","ELSx",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Tcp/TLS/Version","MIN","***"

^SCFG: "Trace/Syslog/OTAP","0"

^SCFG: "Urc/Ringline","local"

^SCFG: "Urc/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","0"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"

^SCFG: "Userware/DebugMode","off"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","usb",,,,"off"

^SCFG: "Userware/Watchdog","1"

^SCFG: "MEopMode/ExpectDTR","current"

^SCFG: "MEopMode/ExpectDTR","powerup"
 

Anybody may help?

Marco