/etc/config/network | Telit Cinterion IoT Developer Community
September 20, 2017 - 11:41am, 19882 views
Hi,
I accidentally mess up the network file and now I'm not able to connect to the ehs6t-LAN modem. Is there a factory reset (will the factory reset back the network file)?
Or I able to connect via serial port through PC and using the some command to setup the network or reset via AT command can solve this?
Cheers
Hi,
I have also messed up the settings in some devices and can't connect to the default address 192.168.1.1. Please tell me how to reset the config to factory default. Thank you!
Hello,
This procedure involves reinstallation of OpenWrt image. What type of terminal fo you have? Please check the sticker for the module name and the code above the barcode.
Regards,
Bartłomiej
Hello,
I also disabled my lan by accident. Can I get instructions on how to factory reset my EHS6T LAN? Thanks!
Hello,
same issue here..could you please also provide me the instruction for the EHS6T-LAN.
Thanks in advance,
Best regards
This procedure is in fact a reinstallation of OpenWrt image in the terminal. There can be now different versions of OpenWrt dedicated for different versions of terminal. So I need to know the terminal version as I described in my previous post.
OK Clear! Cinterion EHS6T LAN --> S30960-S2750-A100 HO
Thanks in advance, Best regards
Hi,
I have two ehs6t-lan. On one I have messed up /etc/config/network and now can't telnet on it or even ping. I suppose there is factory reset is only solution. Another one is new and I never use it. I can't ping it, telnet it... also. I have four more and they work properly.
Would you be so kind to give me solution for both modems?
Thx
Hello,
Looks like "S30960-S2750-A100 H8"
Hello,
I've sent you an email.
Best regards,
Bartłomiej
Hi,
I have two ehs6t-lan. On one I have messed up /etc/config/network and now can't telnet on it or even ping. I suppose there is factory reset is only solution. Another one is new and I never use it. I can't ping it, telnet it... also. I have four more and they work properly.
Would you be so kind to give me solution for both modems?
Thx
PS. I already posted this on wrong place. Sorry
Pages