August 28, 2014 - 11:38am, 14177 views
I have sent you stp file by email.
Please look again at the address I have sent you on the 13th of December: https://iot-developer.thalesgroup.com/documentation/download-documentati...
You will find there the link to the same file sharing server with user and password.
The link from my previous post was just pointing to the folder where bgs2t_hd_v01301c.pdf resides.
Hi, the model is perfect. It would be nice to have it in the RS485 configuration. I tried to open the link but can not find the page and the error message appears. Thank you so much. Best regards,
Good evening, could you provide the 3D step model for BGS2T and EH6ST models ?.
For BGS2T you can open this link https://iot-developer.thalesgroup.com/documentation/download-documentati...
for login credentials, then go here https://webdav.c-wm.net/yknusiay/bgs2t/bgs2t_rev01301/ and download file 'bgs2t_hd_v01301c.pdf'. STP model is attached to the document. I can't see EHS6 terminal there, so I'll send you the pdf.
Please, could you also send me the 3D model for the ELS61 module?
I've sent you an email.
Please, could you also send me the 3D .STEP model for the ELS61-E module?
Generally you can find some drawings and dimensions in HW description document. The 3D model files are available in extranet if you have access. I'll send you more info on email.
Could you please also send me the 3D model for the ELS61-E module?
I have sent you some information on your email.
© 2013-2022 THALES DIS AIS Deutschland GmbH