EHS6 driver for WindowsXP | Telit Cinterion IoT Developer Community
March 28, 2017 - 3:42am, 2787 views
Hi
Currently I am using the usb driver from the package ehsx_driver_1113 but I cannot install on WindowsXP. May I ask if there's any separate driver package for WindowsXP?
Thank you.
Regards
Thu Hang
Hello,
There's no separate version. This should be working. Could you explain some more about what exactly the problem is?
Regards,
Bartłomiej
Hi,
These are some screenshots:
Regards
Thu Hang
Hello,
This driver is not new and it looks like the certificate has expired. But still this is the right driver which should work with your system. The new certificate will probably be generated when the newer version of the driver will be released.
But this first screen doesn't look like it would have anything to do with the certificate expiration.
I suppose that there could be some hardware conflict or other problem in your system or maybe the USB cable that you are using is damaged or too long. So the problem is more related to the OS then the driver.
I think that you could use some freeware software that would display all the USB drivers and devices (even not currently connected), delete all the Cinterion drivers (or all the unused drivers also) and then start the installation from the beginning.
It could also happen that there is a conflict between two USB devices - it could be a flash drive or some other device.
Best regards,
Bartłomiej
*****,
is there a windows 10 driver for the EHS6
regards,
Alvaro
Hello,
There's no new driver but the old one should work.
Regards,
Bartłomiej