/etc/config/network | Telit Cinterion IoT Developer Community
September 20, 2017 - 11:41am, 18472 views
I accidentally mess up the network file and now I'm not able to connect to the ehs6t-LAN modem. Is there a factory reset (will the factory reset back the network file)?
Or I able to connect via serial port through PC and using the some command to setup the network or reset via AT command can solve this?
Hello, I have the same problem. Please,can you send me this method to reset module too?
You should have got an email.
I have the same problem with my EHS6T-LAN modem.
I can ping it, but no port is opened, so no way to access OpenWrt.
So I have to factory reset it. Can you help?
I've sent you an email.
I've changed my company e-mail since, so I did not receive your e-mail.
But, I can not edit my e-mail data in my profile.
Can you send the e-mail to email@example.com?
I've changed your profile email.
I mess up the network file and now I'm not able to connect to the ELS61T-E2 LAN-LTE modem. Can you please send me the procedure to hard reset?
You should have received the message.
seems as my EHS6T is responding the same as the ones described in this conversation.
Getting the firmware and procedure would be appreciated.
replys to ping but no GUI
can still issue commands via Serial
Please check your email.