Newsletter
September 11, 2018 - 10:56am, 3002 views
Hello!
MES does not work.
What do we have to do. I can not load jar files into the module
Hi
Can you provide more details? What exactly means "MES does not work"?
Did you properly installed all files from install CD?
What operating system do you use?
Do you see in "My computer" (This PC) something like "MES" or "Module"?
Can you go into file system but you can't load jar files into it?
Does you have properly connected your module to PC? Do you use serial connection or USB?
Whithout any information or some screens I can't do more than suggest you to read "Java user guide". There is a lot of information about installation using MES or even Eclipse or NetBeans
Regards
Krzysztof
Use EHS6t LAN.
MES is module exchange suite.
All files are installed.
This image appears when I try to enter the module.
I use Windows 10
I can't load jar files into file system, but AT commands are sent OK
Where in the open wrt file system must be located jar files?
Hi
Please try it in that way:
Connect your EHS6T LAN terminal by RS232 interface.
Click on "Module" in "This PC" right mouse button. Set "Properties", go to "Port" and select your COM port where your module is connected. Your COM port number you can check in Device Manager.
Or if you are using LAN interface you won't have access to MES. In that way to send JAR file you will have to use AT commands like SFSA or SJDL.
Regards
Krzysztof
Не получается использовать SFSA or SJDL , так как диск а:/ не инициализируется. Можно ли скопировать файлы напрямую в файловую систему
It is not possible to use SFSA or SJDL, since the disk a: / is not initialized. Can I copy files directly to the file system?
Hi
Can you write how are you connected to your module? By RS232 interface or by LAN connection?
A:/ disk is in on module side, not on your PC. For example if you want to list your files which are saved in module you can type: { AT^SFSA="ls","a:/" }
I reccomend you to connect your EHS6 LAN terminal by RS232 interface to your PC, then go to "This PC" on your Windows 10, click right mouse button on "Module" and set properties and in "Port" set your COM port in what you are conneted to your module. Remember that if other application use this port (Yatt / putty / ZOC or other terminals) that application should be close. Then if any of application uses your COM port then you can open module by left mouse button and you should be inside your module flash memory.
If your AT commads are working I can send you script in ZOC terminal to upload and install JARs.
Regards
Krzysztof