June 7, 2018 - 4:26pm, 2657 views
Please provide for me schematic and footprint library of EMS31-V module, I use Cadence OrCAD and Allegro software.
Please check your email. This module has the same footprint as EHS5.
I have EMS31 eval cinterion board. I was to use USART from the EMS31 modem to hook it up to my Gecko Pearl EVK.
Is AT command USART pins available on EMS31 eval board pin port??
Do you have schematic for this eval board?
Any additional documentation on this modem and eval board would defiunately help.
Generally eval board with 80 pin b2b connector is for research and development purposes. It should be mounted on adapter placed on DSB or B80 starter kit or some other developer board. What do you use? So we don't provide schematics for eval board. But you can have hardware description for B80, DSB75, adapter board.
In the production environment you usually have a module, for which there is a hardware description document, placed on the hardware of your design. We can provide module's footprint to ease the PCB design. Or there are ready terminals with all necessary hardware and casing.
© 2013-2023 Thales DIS AIS Deutschland GmbH - a Telit Cinterion Company