Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

BGS5 undevoltage restart | Telit Cinterion IoT Developer Community

June 13, 2018 - 6:07pm, 1868 views

Hello,

We've been testing a pair of devices, one with a BGS5 rev1.1 and the other with a BGS5 rev2.0. They are working fine but after an "undervoltage shutdown" the rev 1.1 doesn't restart with the IGL (ignition line). It only can be restarted by removing physically the power and connecting it again. The rev 2.0 restarts just fine

Does someone know if there's a way to configure the rev1.1 BGS5 so they restart after an undervoltage?

Thank  you

***

ATI1 

Cinterion

BGS5

REVISION 01.100

A-REVISION 00.000.21

AT^SCFG? 

A

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/mode/ASC1","gpio"

^SCFG: "Gpio/mode/DAI","gpio"

^SCFG: "Gpio/mode/DCD0","gpio"

^SCFG: "Gpio/mode/DSR0","gpio"

^SCFG: "Gpio/mode/DTR0","gpio"

^SCFG: "Gpio/mode/FSR","gpio"

^SCFG: "Gpio/mode/PULSE","gpio"

^SCFG: "Gpio/mode/PWM","gpio"

^SCFG: "Gpio/mode/RING0","gpio"

^SCFG: "Gpio/mode/SPI","gpio"

^SCFG: "Gpio/mode/SYNC","std"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","BGS5"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEopMode/SoR","on"

^SCFG: "Radio/Band","15"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","0","0"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","usb1",,,,"off"

^SCFG: "Userware/Watchdog","1"

********************

Cinterion

BGS5

REVISION 02.000

A-REVISION 01.001.06

OK

OK

AT^SCFG? 

A

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/mode/ASC1","gpio"

^SCFG: "Gpio/mode/DAI","gpio"

^SCFG: "Gpio/mode/DCD0","gpio"

^SCFG: "Gpio/mode/DSR0","gpio"

^SCFG: "Gpio/mode/DTR0","gpio"

^SCFG: "Gpio/mode/FSR","gpio"

^SCFG: "Gpio/mode/PULSE","gpio"

^SCFG: "Gpio/mode/PWM","gpio"

^SCFG: "Gpio/mode/RING0","gpio"

^SCFG: "Gpio/mode/SPI","gpio"

^SCFG: "Gpio/mode/SYNC","std"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","BGS5"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEopMode/SoR","on"

^SCFG: "Radio/Band","15"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","0","0"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/Jamfile/Chkinterval","12"

^SCFG: "Userware/Jamfile/Chkrcvy","0"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Passwd2",

^SCFG: "Userware/Stdout","usb1",,,,"off"

^SCFG: "Userware/Watchdog","1"