EHS-5: bricked after aborted firmware upgrade | Thales IoT Developer Community
April 11, 2018 - 11:18am, 1318 views
I have one EHS-5-based device bricked after gWinSwup cancelled by accident.
I've tried to use "No Firmware in Module" checkbox, and it appears to work, but it fails everytime after flashing some blocks (over 200). Is there any other way to reflash the failing device?
BTW, does it mean, that flashing with AT^SFDL can also make a device unbootable, if device is powered off during the operation? I assume there is only a single firmware image in Flash...
Below is the relevant log part:
[2018-04-09 13:25:55]Initializing firmware update... [2018-04-09 13:26:12]Erasing flash memory (this can take a couple of minutes without visible progress)... [2018-04-09 13:28:47]Transferring firmware in progress... [2018-04-09 13:30:10]ERROR: Timeout waiting for response after block no. 215! [2018-04-09 13:30:10]ERROR: Firmware update failed! [2018-04-09 13:30:10]Parsing configuration file... [2018-04-09 13:30:10]Restoring module state... [2018-04-09 13:30:10]Module update failed