Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

Telit Cinterion IoT Developer Community

MFF2 SIM Cards Specs. MIM QUAD

Documentation, March 5, 2014 - 11:17pm, 92097 views

FullM2M Quad Overview

  • The FullM2M Quad is a Machine Identity Module (MIM) specifically designed for M2M applications. The FullM2M Quad MIM combines traditional smart card security with a more rugged form factor, it is designed to avoid usage of a SIM socket (direct soldering on device’s printed circuit board).

This MIM has a specific form factor (DFN-8, also called SON-8, and previously called VQFN-8 in some documents) defined as MFF2 in the ETSI M2M UICC standard (TS 102.671).

  • Packaging --> ETSI MFF2 (also know as DFN8/ SON8 /VQFN-8)
  • Operating Temperature --> -40ºC to +105ºc
  • Networks compliancy --> 2G/3G/4G
  • Supply Voltage --> ISO class A(5V), B(3V) & C (1.8V)
  • Communication protocol --> ISO
  • OS features --> Javacard ,eXtended-Life , eUICC

  eXtended-Life operating system is a Gemalto’s M2M specific operating system especially designed to maximize the lifespan 
  of the memory chip, making it more resistant to stress (*****/write cycles) and allowing to have a very high level of 
  reliability on the field.
  eUICC is a new feature being implemented in Gemalto products. eUICC transforms the traditional UICC into a Multiple 
  Independant Profile Areas UICC (MIPA concept) where different profiles from different MNOs can securely cohabit in the
  same chip and can remotely be administrated (download, activation, deletion).

  • Dimensions
    • Compliant with ETSI TS 1202.671 MFF2
 

MFF2_pkg_dimensions

  • Pin outline
  • Compliant with MFF2 ETSI specs (M2M UICC - TS102.671). Cx is the corresponding contact reference on SIM module as per ETSI TS 102.221.

MFF2 PIN_OUT

A reference design can be found under the schematics of the concept board

MFF2_circuit_example

It would help if there was a datasheet with soldering instructions and recommended profiles for the eSIM MFF2.

I second that

Can you specify if unconnected pins should be connected to the GND or left unconnected?

And providing a proper documentation is also a mandatory thing for an IC manufacturer! So, please, again, give us some specifications for your IC!

Hello, could you please specify the Moisture Sensivity Level for this IC ?

thanks a lot !

Hello,

please provide standard electrical characteristics: I/O voltages and normal and quiescent currents. Please also provide absolute maximum ratings for I/O lines and supply voltage.

Thank you in advance

Hello,

It will be great if there was a datasheet with package information and recommended profiles for the eSIM MFF2.

Hello , 

Can you please provide layout recommendation detail for eSIM ?

 

Regards

Paresh 

 

Author

Alopez's picture
Alopez