Concept Board in RUN Mode (Active) | Telit Cinterion IoT Developer Community
October 1, 2014 - 9:36pm, 9745 views
Hi Everyone,
I was testing the code example Gpio5V project , i modified it for blinking the D2 LED. when i test with Debug connection the program works fine. But after disconnecting if i press the Start Button my program not running why?
How do i can run my java code (RUN Mode without connecting USB)
Thanks,
Ashok r
Hola Michat de Gemalto
Quiero comentarte que ya hice todo el tutorial y logre hacer el autostart asi con los pasos que diste y funciono sin problemas, pero una vez que reinicie la conceptboard y se ejecuto no se pudo conectar a internet, por que de hecho estoy enviando mensajes conectandome con un socket aun server mqtt y si me funciona perfectamente cuando estoy ejecutandolo por medio del eclipse juno, pero cuando lo hago con el autostart todo me funciona menos el servicio de conexion con la red telefonica, tengo configurado el APN y todo sin problemas, pero no se levantan esos servicios en autostart, podrias ascesorarme para saber que es lo que esta pasando?
Muchas gracias y te envio un cordial saludo.
ATTE
Nancy!
Hello,
Please write your posts in English - this is English speaking forum and you will have a greater chance to get an answer.
Best regards,
Bartłomiej
Hello Bartłomiej from Gemalto
I want to tell you that I already did the whole tutorial and I managed to do the autostart with the steps you took and it worked without problems, but once I rebooted the conceptboard and it was executed it could not connect to the internet, because in fact I am sending messages connecting with a socket even server mqtt and if it works perfectly when I'm executing it through the juno eclipse, but when I do it with the autostart everything works for me the connection service with the telephone network, I have the APN configured and everything without problems, but not those services are raised in autostart, could you go ahead and find out what is going on?
Thank you very much and I send you a warm greeting.
ATTE
Nancy!
Hello,
So you are using the GPIO libs for some GPIO activity and network connections with mqtt protocol in one MIDlet configured for autostart. And there's some problem with network connections when the MIDlet is started automatically. Could you write more details about the application functionality and paste a log to show what exactly is happening? Please also check the same application without autostart and Eclipse - just run it manually. Please also paste the ATI1 command output.
Best regards,
Bartłomiej