Can't set certificate verification to default: ^SJMSEC: 1,0,1,0 | Telit Cinterion IoT Developer Community
November 21, 2017 - 5:17pm, 1450 views
I am trying to put certificate verification to default, but without luck. The default should be: ^SJMSEC: 1,0,1,0
I have change it in the first place by typing AT commad:
restarted the board and since that I can not turn it back to the default.
Now, when I type: AT^SJMSEC?
there is a message: ^SJMSEC: 1,1,1,0
I did tried deleting the certificates using the: AT^SJMSEC=cmd,060091000000, the response I get is OK. But after the reboot, nothing is changed.
Also, I have tried the things from this thread: https://iot-developer.thalesgroup.com/threads/restore-default-sjmsec-101...
On my Windows mashine I had to run the CMD as a administrator, go the ..../Cinterion/CMTK/WTK/bin and run the lines suggested in the thread. But, still, I couldn't restore SJMSEC to default values.
ATI1 gives me:
We also have some board with other FW and it is the same:
Can you help me to restore the default on the SJMSEC?
If you have activated https certificate verification it is not enough to remove all certificates that you have uploaded but you need to deactivate the https certificate verification with a proper command.
Please try this:
and then reboot the module.
Thank you, that helped.