EHS6T - Authentication AT^SGAUTH - SM deactivation | Thales IoT Developer Community
February 6, 2017 - 4:00pm, 4451 views
I'm trying to establish a connection to a customer private network with the EHS6T terminal.
The customer has a SIM card with static IP address assigned by the ISP. I setup de authentication parameters with the command AT^SGAUTH, setup the APN with AT+CGCONT and connect with ATD*99***1#.
The terminal respond CONNECT and then the pppd ****** start the negociation. See the log :
Serial connection established.
using channel 251
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS3
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x225ffd20> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x975999e8> <pcomp> <accomp>]
sent [LCP ConfNak id=0x1 <auth eap>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x975999e8> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x225ffd20> <pcomp> <accomp>]
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x225ffd20> <pcomp> <accomp>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x3]
LCP terminated by peer
sent [LCP TermAck id=0x3]
When I look at the error given by the terminal after the unsuccesful attemp I get this message:
+CEER: "SM deactivation",129,"User authentication failed"
I'm sure that the APN, login, password are correct. They have been tested with an other equipement.
Can u help me to solve this problem? It's really urgent!
thanks in advance