Having trouble with EHS6 network registration. | Telit Cinterion IoT Developer Community
February 20, 2017 - 9:44am, 9841 views
Hello,
So i'm working on the EHS6 right now but it looks like it's not registered to a network so i can't send SMS.
AT+CREG =0,2.
AT+CSQ: 99,99
AT^SCFG?
^SCFG: "Audio/Loop","0"
^SCFG: "Call/ECC","0"
^SCFG: "Call/Ecall/AckTimeout","5000"
^SCFG: "Call/Ecall/Callback","0"
^SCFG: "Call/Ecall/CallbackTimeout","43200000"
^SCFG: "Call/Ecall/Msd","0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"
^SCFG: "Call/Ecall/Pullmode","0"
^SCFG: "Call/Ecall/SessionTimeout","20000"
^SCFG: "Call/Ecall/StartTimeout","5000"
^SCFG: "Call/Speech/Codec","0"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Gpio/mode/ASC1","std"
^SCFG: "Gpio/mode/DAI","gpio"
^SCFG: "Gpio/mode/DCD0","gpio"
^SCFG: "Gpio/mode/DSR0","gpio"
^SCFG: "Gpio/mode/DTR0","gpio"
^SCFG: "Gpio/mode/FSR","gpio"
^SCFG: "Gpio/mode/HSIC","rsv"
^SCFG: "Gpio/mode/PULSE","gpio"
^SCFG: "Gpio/mode/PWM","gpio"
^SCFG: "Gpio/mode/RING0","gpio"
^SCFG: "Gpio/mode/SPI","rsv"
^SCFG: "Gpio/mode/SYNC","std"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","EHS6"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "MEShutdown/sVsup/threshold","0","0"
^SCFG: "MEopMode/CFUN","0","1"
^SCFG: "MEopMode/Dormancy","0","0"
^SCFG: "MEopMode/SoR","off"
^SCFG: "Radio/Band","511"
^SCFG: "Radio/Mtpl","0"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0058","Cinterion Wireless Modules","EHx",""
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/OTAP","0"
^SCFG: "URC/Ringline","local"
^SCFG: "URC/Ringline/ActiveTime","2"
^SCFG: "Userware/Autostart","1"
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"
^SCFG: "Userware/DebugMode","off"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","null",,,,"off"
^SCFG: "Userware/Watchdog","0"
OK
I tried of course the SIM card with other devices and it works just fine.
Any ideas ?
Regards
Hello,
Have you checked the SIM status with AT+CPIN? How about AT^SMONI, AT+COPS? Is the antenna connected? Have you entered airplane mode?
Regards,
Bartłomiej
Hello, thanks for the answer !
For the AT+CPIN: READY.
AT^SMONI: 2G, SEARCH, SEARCH
AT+COPS: 2.
And no i didn't entered the airplane mode. the antenna is connected but when i run AT+CSQ i get : 99,99.
Regards.
The CSQ reply is OK since the module has not yet registered to the network. It seems that it's trying to register to 2G at the moment when you have sent AT^SMONI command. Do you have 2G/3G network available? Please also send AT+COPS=0 to make sure that automatic operator selection is set. Was it possible to register to the network before? Do you have any other module to compare? What hardware are you using with the module? Are you sure that the antenna is connected correctly?
Regards,
Bartłomiej
Well well well,
I just changed the antenna with another one more powerfull and the results of the above commands have changed :
AT^SMONI: 3G,10712,472,-9.0,-105,208,01,0509,252CF2E,9,10,NCONNU
AT+COPS:0,0,"Orange F",2
AT+CSQ=10 ,99
AT+CPIN : READY.
but i still get errors when i try to send sms
AT+CMGF=1
AT+CMGS="0*********" /// i tried the +33 international one didn't work.
>message <ctrl-z>
I have a Conel LR77 and it works just fine with it.
Regards.
Hello,
So it seems that there was a problem with antenna.
Please check if the proper SMS service center number is configured with AT+CSCA command.
And please paste the log in case of the problem still exists.
Regards,
Bartłomiej
Hello,
The SMS service center number is configured.
AT+CMGF?
+CMGF: 1
OK
AT+CSCA?
+CSCA: "+3369500695",145
OK
AT+CSQ
+CSQ: 11,99
OK
AT+CMGS=?
OK
AT+CMGS="07********"
> text msg
ERROR
this is all what i get.
is there any way to get more detailed logs ?
Regards,
Please send AT+CMEE=2 before sending the SMS. You should see more.
Please also check these:
AT+CSMS?
AT+CSMP?
AT+CSMS?
+CSMS: 0,1,1,1
OK
AT+CSMP?
+CSMP: 17,168,0,0
AT+CMEE=2
OK
AT+CMGS=?
OK
AT+CMGS="07*******"
> text
+CMS ERROR: Network out of order (service)
Hello,
Very strange error - this suggest that it is a network isuue.
Please make sure that you have configured the proper service center number. If this is not the case maybe you should contact the network provider and verify if SMS is included in your subscription. You may try to verify the SIM card in some other device first.
Regards,
Bartłomiej
Hello,
As i said earlier i'm using a Conel LR77 with the same SIM card and same service center number and the same antenna, it works just fine.
There's AT+CREG=0,5 wich i find strange though.
Regards.
Pages