February 11, 2017 - 8:56pm, 2811 views
Chip firmware: ELS31-V, Version: 184.108.40.206-25421
Modem return ERROR to command AT^SISX="Ntp",3,"wwv.nist.gov"
What is wrong with command format?
Please paste the complete log and also set AT+CMEE=2 to see the error description.
The complete log:
+CME ERROR: Incorrect parameters
Is it possible that it has something to do with DNS? Have you tried with IP?
Have you checked AT^SISX=? to check the possible connection profiels?
^SISX: (service), (0-6), (host), (0-30), (200-10000)
I have tried several NIST servers with same result.
DNS works fine:
I have found out that there was a problem with NTP and some fix has been made for that. But as this is still a pre-release product version you would have to contact your module's provider to ask if there is any updated firmware available that solves this problem.
I will contact the provider.
© 2013-2014 Gemalto M2M GmbH