Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

SSL/TLS/^SJMSEC, firmware and release notes for EHS6 | Telit Cinterion IoT Developer Community

February 1, 2017 - 10:38am, 2994 views

(I was going to move this to be a follow up to "Breaking Java Security"

with a firmware update, but have moved it back because this really

isn't related to "updating")

I'm trying to get SSL/TLS working on an EHS6. The SJMSEC command fails

with "unknown" (see below). I think this means that this version of firmware

doesn't have that command/functionality in it.

It'd be nice to have access to firmware release notes so as to "go back in

time" and confirm such suspicions.

Otherwise (or if not), have any suggestions for how to resolve this?


^SYSLOADING

+PBREADY

^SYSINFO: 200

ati1
Cinterion
EHS6
REVISION 02.000
A-REVISION 00.000.15

OK
at^sjmsec=?
ERROR

at+cmee=2
OK

at^sjmsec?
+CME ERROR: Unknown

at^scfg?
^SCFG: "Call/ECC","0"
^SCFG: "Gpio/mode/ASC1","gpio"
^SCFG: "Gpio/mode/DAI","gpio"
^SCFG: "Gpio/mode/DCD0","std"
^SCFG: "Gpio/mode/DSR0","std"
^SCFG: "Gpio/mode/DTR0","std"
^SCFG: "Gpio/mode/FSR","gpio"
^SCFG: "Gpio/mode/HSIC","gpio"
^SCFG: "Gpio/mode/PULSE","gpio"
^SCFG: "Gpio/mode/PWM","gpio"
^SCFG: "Gpio/mode/RING0","std"
^SCFG: "Gpio/mode/SPI","rsv"
^SCFG: "Gpio/mode/SYNC","gpio"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","EHS6"
^SCFG: "MEopMode/SoR","off"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "Radio/Band","511"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0058","Cinterion Wireless Modules","EHx",""
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/Otap","0"
^SCFG: "Userware/Autostart","1"
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"
^SCFG: "Userware/DebugMode","on"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","asc1",,,,"off"
^SCFG: "Userware/Watchdog","1"

OK