Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

ASC0 as an AT interface | Telit Cinterion IoT Developer Community

October 10, 2016 - 9:25am, 2481 views

Hello,

I cannot use ASC0 of my BGS5T as an AT interface. I cannot receive at responses. I can do it from USB port.

I checked the settings of at^scfg, at+ipr and at^spow. They seem ok. I tried with flow control as none and flow control as RTS/CTS from terminal program. It doesn't work in both situations.

I have another BGS5T. It doesn't work for flow control none but it works when I select flow control as RTS/CTS. I think, RTS/CTS control is needed for ASC0 when using PC terminal program.

What can be the problem?

scfg, ipr and spow answers are below:

at^spow?

^SPOW: 1,0,0

OK

at+ipr?

+IPR: 115200

OK

at^scfg?

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/mode/ASC1","std"

^SCFG: "Gpio/mode/DAI","gpio"

^SCFG: "Gpio/mode/DCD0","std"

^SCFG: "Gpio/mode/DSR0","std"

^SCFG: "Gpio/mode/DTR0","std"

^SCFG: "Gpio/mode/FSR","gpio"

^SCFG: "Gpio/mode/PULSE","gpio"

^SCFG: "Gpio/mode/PWM","gpio"

^SCFG: "Gpio/mode/RING0","std"

^SCFG: "Gpio/mode/SPI","rsv"

^SCFG: "Gpio/mode/SYNC","std"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","BGS5"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEopMode/SoR","on"

^SCFG: "Radio/Band","15"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","1","1"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","100"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","usb1",,,,"off"

^SCFG: "Userware/Watchdog","0"

OK