Huawei to Cinterion project | Telit Cinterion IoT Developer Community
October 7, 2016 - 4:40pm, 1632 views
I am in the process of converting our device from Huawei MC323 to Cinterion ELS31-V as well as the EHS6. For the first step I am doing the EHS6 conversion expecting the EHS6 to ELS31-V will be pretty minor. The AT commands from the Huawei modules are completely different therefore the question. Is there an application note that provides a step by step AT command overview to get the module from a cold state to and active, IP connected state? We do not use voice, only data and SMS. Any help would be greatly appreciated.
Thank you,
Allan Overcast
Hello,
There's no such document that would show different scenarios step by step. Some examples you can find in the AT commands specification and our Knowledge Base, especially for IP services over AT commands. There are some dedicated documents for hardware and USB descriptions, firmware update, Java and possibly some more.
If you have any particular problems please write some details on the forum.
Best regards,
Bartłomiej
Thank you, I was just hoping, so I will work my way through it.
Allan Overcast